Apple - iPad 9.7 Air/Pro 9.7/5th/6th - Tempered Glass

• [PRECISION CUT TO FIT] - For Apple iPad Pro 9.7, iPad 9.7 5th/6th Gen, iPad Air/Air2, The KIQ Tempered Glass Screen cover is the perfect solution for your device. Smooth edges for safety with home button cut-outs for easy access. Glass Screen protector provides higher rating of protection than a standard flimsy protector.
• [TEMPERED GLASS PROTECTION] - Best protection in the market. Unlike the thin and flimsy pet material, our glass can withstand much more damage. Scratch-resistant screen that is 0.30mm approximate thickness and 9H hardness making our tempered glass the strongest and toughest in the market.
• [Easy, Bubble-Free, Stress-Free Installation] - One side of the layer have self-adhesive coating that allows the glass to sit on the screen securely. Simply clean (lint-free) and allow it to dry. Peel the protective film from the glass. Align, and gently place the tempered glass on your tablets screen. Push the center of the glass and allow it to stick. You may need to put a little pressure on areas of the screen where it doesn't stick as air pockets may form but eventually goes away.
• [CASE-FRIENDLY SCREEN SHIELD COVER] - Precision cut with smooth edges provides maximum safety and makes the screen protector case-friendly allowing you to use your favorite cover. Some cases, may go over the top of the screen which may affect the installation of this screen. Please make sure your cover does not go over the screen where the glass will be placed over.
• [Anti-Fingerprint & Touch Responsive] - Fully functioning screen protector which doesn't compromise the use of your tablet and is responsive to the touch. Oleophobic coating which is smudge resistant and easy to clean. 99% clarity with maximum vibrant that is clear and crisp.

Installation Guide:

Step 1:

Make sure your device is completely cool.
Install in a dust-free / clean environment
Be careful not to put fingerprint on the screen or the glass. (if dust is on the glass or the screen, you can try wrapping a scotch tape around your finger (adhesive side out) and remove the dust
Clean your devices' screen thoroughly so no dust or lint is present.
Begin cleaning by using the alcohol prep wipe. Then remove all moisture using the dry cloth. Make sure that the alcohol wipe and solution have dried out and the screen is free from oil / residue as it will affect the glass from adhering properly.

Step 2:

Hold onto the sides of the protector; peel the clear sheet off revealing the adhesive sides of the glass. Make sure not to touch the adhesive side of the protector.

Step 3:
Align the bottom(or top) of the glass with your display and lay down gently.
Make sure that the protector is aligned properly before continuing.

Step 4:
Gently press the center of the glass and slide your finger along the center of your device and the adhesive will spread out evenly.This is important to prevent air bubbles forming from the center.

Ensure that the adhesive adheres completely on to the screen of your device.

Step 5:
If any bubbles remain, you can use a soft lint-free cloth and push the bubble towards the edge of the glass. If there are lint and dust, repeat step 1.
If there are bubbles, you can also gently lift one corner (closest to the air bubble) and release so it tries to apply itself on the glass again. You may repeat this process until it evenly adheres on the glass. Make sure that there is no lint/residue gets it between.
Please note that the closer the bubble is to the center, the more you have to lift the corner.

All orders placed Mon - Fri before 2:00 PM PST will ship the same day.

All orders are eligible for free shipping and typically take 3 to 5 business days to arrive. Expedited delivery (2 to 3 business days) is available for an extra fee.

All products come with a lifetime warranty and hassle-free returns. A full refund or exchange will be provided, no questions asked.